Go to the content. | Move to the navigation | Go to the site search | Go to the menu | Contacts | Accessibility

| Create Account
Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: EPrint type | Creators Name | No Grouping
Number of items at this level: 288.

Conference papers

Barcaro, Massimo and Fornasiero, Emanuele and Bianchi, Nicola and Bolognani, Silverio (2011) Design Procedure of IPM Motor Drive for Railway Traction. [Conference papers] In: IEEE - IEMDC 2011 International Electric Machines and Drives Conference, 15-18 May 2011, Niagara Falls.

Bianchi, Nicola and Bolognani, Silverio and Fornasiero, Emanuele and Morandin, Mattia and Pavesi, Giorgio (2012) Optimal Drive And Machine Sizing For A Self Starting, Vertical Axis, Low Power Wind Generator. [Conference papers] In: IEEE - ENERGYCON 2012 International Energy Conference & Exhibition, 9-12 September 2012, Firenze.

Bianchi, Nicola and Durello, Dario and Fasolo, Alessandro (2011) Relationship between Rotor Losses and Size of Permanent Magnet Machines. [Conference papers] In: SDEMPED 2011, 8th IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives, September, 5-8 2011, Bologna.

Bianchi, Nicola and Durello, Dario and Fornasiero, Emanuele (2012) Multi Objective Optimization of an Interior PM Motor for a High Performance Drive. [Conference papers] In: ICEM 2012 International Conference on Electrical Machines, September 2-5, 2012, Marseille, France, .

Bianchi, Nicola and Fornasiero, Emanuele and Bolognani, Silverio (2011) Thermal Analysis of a Five-Phase Motor Under Faulty Operations. [Conference papers] In: SDEMPED 2011, 8th IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics & Drives, September, 5-8 2011, Bologna.

Faggion, Adriano and Bianchi, Nicola and Bolognani, Silverio and Fornasiero, Emanuele (2012) Zero-speed sensorless drive capability of fractional-slot inset PM machine. [Conference papers] In: PEMD 2012 Power Electronics, Machines and Drives Conference, 27-29 March 2012, Bristol.

Faggion, Adriano and Bolognani, Silverio and Sgarbossa, Luca (2011) Rotor position estimation in IPM motor drives
based on PWM current harmonics.
[Conference papers] In: IEEE IEMDC 2011.

Faggion, adriano and Fornasiero, Emanuele and Bianchi, Nicola and Bolognani, Silverio (2011) Sensorless Capability of Fractional-Slot Surface-Mounted PM Motors. [Conference papers] In: IEEE - IEMDC 2011 International Electric Machines and Drives Conference, 15-18 May 2011, Niagara Falls.

Journal papers (printed)

Elsayed, Hamada and Javed, Hassan and Sabato , Antonio G. and Smeacetto, Federico and Bernardo, Enrico (2018) Novel glass-ceramic SOFC sealants from glass powders and a reactive silicone binder. [Journal papers (printed)]

Rabelo Monich, Patricia and Dogrul, Fulden and Lucas, Hugo and Friedrich, Bernd and Bernardo, Enrico (2019) Strong porous glass-ceramics from alkali activation and sinter-crystallization of vitrified MSWI bottom ash. [Journal papers (printed)]

Rabelo Monich, Patricia and Rincon Romero, Acacio and Hoellen, Daniel and Bernardo, Enrico (2018) Porous glass-ceramics from alkali activation and sinter-crystallization of mixtures of waste glass and residues from plasma processing of municipal solid waste. [Journal papers (printed)]

Rabelo Monich, Patricia and Vollprecht, Daniel and Bernardo, Enrico (2020) Dense glass-ceramics by fast sinter-crystallization of mixtures of waste-derived glasses. [Journal papers (printed)]

Rincon Romero, Acacio and Desideri, Daniele and Bernardo, Enrico (2018) Functional glass-ceramic foams from "inorganic gel casting" and sintering of glass/slag mixtures. [Journal papers (printed)]

Rincon Romero, Acacio and Elsayed, Hamada and Bernardo, Enrico (2018) Highly porous mullite ceramics from engineered alkali activated suspensions. [Journal papers (printed)]

Rincon Romero, Acacio and Giacomello, Giovanni and Pasetto, Marco and Bernardo , Enrico (2017) Novel "inorganic gel casting" process for the manufacturing of glass foams. [Journal papers (printed)]

Rincon Romero, Acacio and Marangoni, Mauro and Cetin, Suna and Bernardo, Enrico (2016) Recycling of inorganic waste in monolithicand cellular glass-based materials forstructural and functional applications. [Journal papers (printed)]

Rincon Romero, Acacio and Salvo, Milena and Bernardo, Enrico (2018) Up-cycling of vitrified bottom ash from MSWI into glass-ceramic foams by means of "inorganic gel casting" and sinter-crystallization. [Journal papers (printed)]

Rincon Romero, Acacio and Tamburini, Sergio and Taveri, Gianmarco and Tousek, Jaromir and Dlouhy, Ivo and Bernardo, Enrico (2018) Extension of the 'inorganic gel casting' process to the manufacturing of boro-alumino-silicate glass foams. [Journal papers (printed)]

Toniolo, Nicoletta and Rincon Romero, Acacio and Marangoni, Mauro and Boccaccini, Aldo R. and Bernardo, Enrico (2018) Glass-ceramic proppants from sinter-crystallisation of waste-derived glasses. [Journal papers (printed)]

Toniolo, Nicoletta and Rincon Romero, Acacio and Roether, J.A. and Ercole, Piero and Bernardo, Enrico and Boccaccini, Aldo R. (2018) Extensive reuse of soda-lime waste glass in fly ash-based geopolymers. [Journal papers (printed)]

Online journal papers

Dasan, Arish and Elsayed, Hamada and Kraxner, Jozef and Galusek, Dusan and Bernardo, Enrico (2019) Hierarchically porous 3D-printed akermanite scaffolds from silicones and engineered fillers. [Online journal papers]

Dasan, Arish and Elsayed, Hamada and Kraxner, Jozef and Galusek, Dusan and Colombo, Paolo and Bernardo, Enrico (2020) Engineering of silicone-based mixtures for the digital light processing of Åkermanite scaffolds. [Online journal papers]

Elsayed, Hamada and Picicco, Martiniano and Dasan, Arish and Kraxner, Jozef and Galusek, Dusan and Bernardo, Enrico (2020) Glass powders and reactive silicone binder: Application to digital light processing of bioactive glass-ceramic scaffolds. [Online journal papers]

Elsayed, Hamada and Picicco, Martiniano and Dasan, Arish and Kraxner, Jozef and Galusek, Dusan and Bernardo, Enrico (2019) Glass powders and reactive silicone binder: Interactions and application to additive manufacturing of bioactive glass-ceramic scaffolds. [Online journal papers]

Elsayed, Hamada and Rincon Romero, Acacio and Letizia, Ferroni and Chiara, Gardin and Barbara, Zavan and Enrico, Bernardo (2017) Bioactive glass-ceramic scaffolds from novel 'inorganic gel casting' and sinter-crystallization. [Online journal papers]

Elsayed, Hamada and Rincon Romero, Acacio and Molino, Giulia and Vitale Brovarone, Chiara and Bernardo, Enrico Bioactive Glass-Ceramic Foam Scaffolds from 'Inorganic Gel Casting' and Sinter-Crystallization. [Online journal papers]

Elsayed, Hamada and Rincon Romero, Acacio and Picicco, Martiniano and Kraxner, Jozef and Galusek, Dusan and Colombo, Paolo and Bernardo, Enrico (2020) Glass-ceramic foams and reticulated scaffolds by sinter-crystallization of a hardystonite glass. [Online journal papers]

Hujova, Miroslava and Rabelo Monich, Patricia and Sedlacek, Jaroslav and Hnatko, Miroslav and Kraxner, Jozef and Galusek, Dusan and Bernardo, Enrico (2020) Glass-Ceramic Foams from Alkali-Activated Vitrified Bottom Ash and Waste Glasses. [Online journal papers]

Kraxner, Jozef and Michalek, Martin and Rincon Romero, Acacio and Elsayed, Hamada and Bernardo, Enrico and Boccaccini, Aldo R. and Galusek, Dusan (2019) Porous bioactive glass microspheres prepared by flame synthesis process. [Online journal papers]

Rabelo Monich, Patricia and Dogrul, Fulden and Lucas, Hugo and Friedrich, Berndt and Bernardo, Enrico (2019) Strong porous glass-ceramics from alkali activation and sinter-crystallization of vitrified MSWI bottom ash. [Online journal papers]

Rabelo Monich, Patricia and Rincon Romero, Acacio and Desideri, Daniele and Bernardo, Enrico (2020) Waste-derived glass-ceramics fired in nitrogen: Stabilization and functionalization. [Online journal papers]

Rabelo Monich, Patricia and Rincon Romero, Acacio and Rambaldi, Elisa and Bernardo, Enrico (2020) Case studies of up-cycling of partially crystallized ceramic waste in highly porous glass-ceramics. [Online journal papers]

Rabelo Monich, Patricia and Vollprecht, Daniel and Bernardo, Enrico (2020) Dense glass-ceramics by fast sinter-crystallization of mixtures of waste-derived glasses. [Online journal papers]

Ramteke, Durgaprasad D. and Hujova, Miroslava and Kraxner, Jozef and Galusek, Dusan and Rincon Romero, Acacio and Falcone, Roberto and Bernardo, Enrico (2021) Up-cycling of "unrecyclable" glasses in glass-based foams by weak alkali-activation, gel casting and low-temperature sintering. [Online journal papers]

Rincon Romero, Acacio and Toniolo, Nicoletta and Boccaccini, Aldo R. and Bernardo, Enrico (2019) Glass-Ceramic Foams from 'Weak Alkali Activation' and Gel-Casting ofWaste Glass/Fly Ash Mixtures. [Online journal papers]

Taveri, Gianmarco and Bernardo, Enrico and Dlouhy, Ivo (2018) Mechanical Performance of Glass-Based Geopolymer Matrix Composites Reinforced with Cellulose Fibers. [Online journal papers]


Zocca, Andrea (2015) Additive Manufacturing of Porous Ceramic Structures from Preceramic Polymers. [Other] UNSPECIFIED.

Ph.D. thesis

Bordin, Alberto (2016) Machinability of Ti6Al4V alloy produced by electron beam melting under different lubricating conditions. [Ph.D. thesis]

Abusief, Fatihe Ramadan (2017) Islanded Distribution Networks Supplied by Distributed Generation. [Ph.D. thesis]

Accorsi, Riccardo (2013) Integrated Models and Tools for Design and Management of Global Supply Chain. [Ph.D. thesis]

Akhlas, Junaid (2017) Petcoke & Coal Exploitation: Development of Environment Friendly Processes. [Ph.D. thesis]

Alessio, Giulia (2018) Experimental and theoretical energy and comfort analyses on radiant systems. [Ph.D. thesis]

Aloisi, Valentina (2017) Industrial X-ray computed tomography: accuracy enhancement and errors evaluation towards traceability of coordinate measurements. [Ph.D. thesis]

Angiola, Marco (2016) Gas sensing properties of carbon nanostructures. [Ph.D. thesis]

Antonucci, Domenico Fernando (2013) Il metodo di calcolo quasi-stazionario del fabbisogno energetico di raffrescamento in Italia. [Ph.D. thesis]

Artuso, Paolo (2019) Theoretical and experimental analysis of the transient behaviour of refrigerated transport systems. [Ph.D. thesis]

Avantaggiato, Marta (2018) Mixed-mode ventilation design and thermal comfort in transitional spaces. [Ph.D. thesis]

Azzolin, Marco (2016) Experimental study of phase change heat transfer in minichannels for ground and space applications. [Ph.D. thesis]

Babetto, Cristian (2019) Design Advances in Synchronous Reluctance and Permanent Magnet Assisted Synchronous Reluctance Machines. [Ph.D. thesis]

Bacco, Giacomo (2019) Advanced Design and Optimization of Anisotropic Synchronous Machines. [Ph.D. thesis]

Bagarella, Giacomo (2015) Regolazione ottima dei circuiti frigoriferi con particolare attenzione all'efficienza energetica. [Ph.D. thesis]

Bai, Chengying (2018) Highly porous geopolymer components. [Ph.D. thesis]

Balcon, Manuel (2013) Geometrical metrology at micro scale: new approach and application to microfluidic devices. [Ph.D. thesis]

Bano, Gabriele (2019) Pharmaceutical development and manufacturing in a Quality by Design perspective: methodologies for design space description. [Ph.D. thesis]

Barbera, Elena (2017) Industrial production of microalgae by an eco-sustainable process: light utilization efficiency and nutrient recycling. [Ph.D. thesis]

Basoni, Jacopo (2015) Ricerca e sviluppo su problematiche metallurgiche e di saldabilità per i prodotti di De Pretto Industrie e FOC Ciscato. [Ph.D. thesis]

Bedon, Gabriele (2016) Aero-Structural Optimization of Vertical Axis Wind Turbines. [Ph.D. thesis]

Bellomare, Filippo (2015) Washing and drying innovative systems for household appliances. [Ph.D. thesis]

Benato, A. (2015) Power plants behaviour during transient operating conditions. [Ph.D. thesis]

Benedetti, Alberto (2018) Microstructural Characterization of CaO-based Sorbents During CO2 Capture and Sorbent Regeneration. [Ph.D. thesis]

Bernardi, Andrea (2015) A Model-Based investigation on the effect of Light on Microalgae Growth: Focusing on Photoproduction, Photoregulation and Photoinhibition. [Ph.D. thesis]

Bertolini, Rachele (2018) Innovative machining strategies to manufacture biomedical prostheses for improved in-life functional performances. [Ph.D. thesis]

Bianchi, Christian (2018) Scientific and Technological Advancements in Microwave and Radiofrequency Engineering: from Safety in Food Heating and in Bioelectromagnetics to Assisted Chemical Processing. [Ph.D. thesis]

Biasin, Alberto (2015) CO2 capture with solid sorbents: materials characterization and reaction kinetics. [Ph.D. thesis]

Bisetto, Alberto (2015) Enhancement of single- and two- phase heat transfer: inside heat generators. [Ph.D. thesis]

Boaretti, Carlo (2016) Development of nanostructured membranes for energy and environmental applications. [Ph.D. thesis]

Bortolato, Matteo (2014) Two-phase heat transfer inside minichannels: fundamentals and applications in refrigeration and solar technology. [Ph.D. thesis]

Bortolini, Marco (2013) Design, control and management of renewable energy plants and technologies. [Ph.D. thesis]

Bosich, Daniele (2014) Medium Voltage DC integrated power systems for large all electric ships. [Ph.D. thesis]

Bressan, Fernando (2015) Multiphysics modeling for electroheat processes. [Ph.D. thesis]

Bressan, Riccardo (2012) Studio fluidodinamico del confinamento dell'anidride carbonica nel sottosuolo. [Ph.D. thesis]

Busato, Giulio (2013) Analisi teorica e sperimentale sulle pompe di calore. [Ph.D. thesis]

Calabrese, Rolando (2017) Evaluations on the sustainability of energy scenarios and role played by nuclear energy. [Ph.D. thesis]

Caneri, Massimiliano (2014) Design and development of the MotoMacchina vehicle. [Ph.D. thesis]

Capurso, Giovanni (2013) Innovative Materials and Systems for Solid State Hydrogen Storage. [Ph.D. thesis]

Carraro, Enrico (2017) Analysis and design procedures of permanent magnet machines for hybrid electric vehicles and rail-traction applications. [Ph.D. thesis]

Cason, Claudio (2017) Gold alloys: study of the microstructural, mechanical characteristics and final optimization of production parameters for the realization of full and cable pipe chains. [Ph.D. thesis]

Castaldo, Antonio (2019) Development of equivalent plasma-circuits axisymmetric models for existing and future tokamaks. [Ph.D. thesis]

Castegnaro, Stefano (2017) An Aerodynamic Method to Design Low-Speed Axial Fans with Imposed Diameter and Rotor speed. [Ph.D. thesis]

Cerchier, Pietrogiovanni (2017) Strategic metals recovery from wastes. [Ph.D. thesis]

Ceretta, Flavio (2013) Synthesis and characterization of fluorinated compounds for industrial applications. [Ph.D. thesis]

Cervato, Andrea (2015) Energy analysis of household devices and their modeling software. [Ph.D. thesis]

Chukin, Dmitry (2017) Formation of structure and properties by heat treatment in high-strenght Fe-Ni-C invar alloys, doped with cobalt, vanadium and molybdenum. [Ph.D. thesis]

Cittadini, Michela (2014) Nanostructured materials for plasmonic based gas sensors. [Ph.D. thesis]

Coccon, Marco (2015) Structural Reliability Analysis of Complex Systems: Applications to Offshore and Composite Structures. [Ph.D. thesis]

Colla, Laura (2014) Experimental characterization of nanofluids as heat transfer media. [Ph.D. thesis]

Conte, Alberto (2018) Development of brake components: geopolymer based brake pads. [Ph.D. thesis]

Coppo, Massimiliano (2016) Modeling and management of active electric distribution networks. [Ph.D. thesis]

Corradetti, Stefano (2013) Study and development of high release refractory materials for the SPES project. [Ph.D. thesis]


d'Amore, Federico (2019) Design and optimisation of European supply chains for carbon capture, transport, and sequestration. [Ph.D. thesis]

Da Lio, Luca (2019) Preliminary design of organic fluid turbines to predict the efficiency. [Ph.D. thesis]

Da Rù, Davide (2017) Innovative Predictive Current Control for Synchronous Reluctance Machines. [Ph.D. thesis]

da Rin, Aldo (2014) Integrated Power Systems in All Electric Ships: Dependability Oriented Design. [Ph.D. thesis]

Dal Bianco, Nicola (2017) Optimal control of road vehicles: theory and applications. [Ph.D. thesis]

Dal Mas, Lorenzo (2013) Aerodynamic Shape Optimization of the Helicopter Main Rotor Hub Beanie, Using Advanced Multi-Objective Evolutionary Algorithms. [Ph.D. thesis]

dal monte, andrea (2017) Development of an open source environment for the aero-structural optimization of wind turbines. [Ph.D. thesis]

Dal Pastro, Filippo (2017) Grain process optimization by data-driven modeling. [Ph.D. thesis]

Dall'Ora, Luca (2014) Analysis and Design of a Linear Tubular Electric Machine for Free-piston Stirling Micro-cogeneration Systems. [Ph.D. thesis]

Dallan, Eleonora (2019) Numerical and experimental methods for stream and wetland modelling. [Ph.D. thesis]

Dambone Sessa, Sebastian (2017) Analisi dell'accumulo elettrochimico ad alta temperatura per l'integrazione delle fonti rinnovabili nella rete di trasmissione nazionale. [Ph.D. thesis]

De Farias Silva, Carlos Eduardo (2017) Exploitation of microalgal biomass as an alternative source to bioethanol production. [Ph.D. thesis]

De Luca, Riccardo (2017) An investigation on microalgae growth at different scales: from photosynthetic mechanisms modelling to operation optimisation in open pond cultivation systems. [Ph.D. thesis]

De Muri, Michela (2013) Simulation, design and tests of a diagnostic calorimeter for the spider experiment. [Ph.D. thesis]

De Soricellis, Milo (2018) Disturbance Suppression in PMSM Drives
Physical Investigation, Algorithm Design and Implementation.
[Ph.D. thesis]

De Vanna, Francesco (2019) A high-resolution fully compressible Navier-Stokes solver for analysis of moving objects at high Mach numbers. [Ph.D. thesis]

Deganello, Marta (2013) Modellizzazione e misure di proprietà di trasporto nello scambio di calore e di massa nei mezzi porosi. [Ph.D. thesis]

Degano, Michele (2015) Analysis, Design and Optimization of Innovative Electrical Machines Using Analytical and Finite Element Analysis Methods. [Ph.D. thesis]

Dengo, Carlo (2015) Fatigue Performance Evaluation of Gears used in Off-Highway Drivelines. [Ph.D. thesis]

Destro, Nicola (2016) Ottimizzazione dei sistemi di accumulo dell'energia, con particolare attenzione agli impianti di pompaggio connessi alla rete. [Ph.D. thesis]

Di Palma, Emanuele (2018) Theoretical study and design of a CARM type millimeter wave source. [Ph.D. thesis]

Diani, Andrea (2014) Experimental and numerical analysis of microstructured surfaces. [Ph.D. thesis]

Dipasquale, Daniele (2017) Adaptive Grid Refinement and Scaling Techniques Applied to Peridynamics. [Ph.D. thesis]

Donà, Mirco (2013) Mathematical models for the use of low and medium temperature geothermal energy. [Ph.D. thesis]

Doni, Angelo (2013) Processes and technologies for crystalline silicon production for photovoltaic applications. [Ph.D. thesis]

Dugaria, Simone (2018) Advanced surface and volumetric receivers to convert concentrated solar radiation. [Ph.D. thesis]

Elarga, Hagar (2017) Energy Efficient Building's Envelopes. Numerical and experimental analysis of innovative solutions. [Ph.D. thesis]

Elsayed, Hamada Said Abdelwahab (2017) Biodegradable and Bioactive Porous Polymer/Inorganic Nanocomposites Scaffolds for Biomedical Applications. [Ph.D. thesis]

Farajzadeh Khosroshahi, Siamak (2017) New Energy Absorbing Materials and their Use in Personal Protective Equipment. [Ph.D. thesis]

Fasolo, Alessandro (2013) Multi Polar Direct Drive Permanent Magnet Synchronous Machines for Renewable Energy. [Ph.D. thesis]

Fedele, Andrea (2018) Towards Life Cycle Sustainability Assessment: development of a new method to integrate particular matter formation in climate change impact assessment. [Ph.D. thesis]

Ferrari, Luigi (2016) Development and Manufacturing of the IFMIF/EVEDA RFQ Modules. [Ph.D. thesis]

Ferrari, Marco (2013) Design of light hybrid vehicles suited to urban and sub-urban mobility. [Ph.D. thesis]

Ferrarini, Giovanni (2017) Evaluation of Thermal Heat Fluxes in Buildings with Infrared Thermography. [Ph.D. thesis]

Ferreira de Araujo Lima, Priscila (2019) The Development of Project Risk Management in Small and Medium Enterprises. [Ph.D. thesis]

Filippini, Mattia (2019) Magnetic gears numerical modelling and optimization. [Ph.D. thesis]

Finetto, Christian (2014) Analysis of muscle coordination for the design of improved interacting robotic systems. [Ph.D. thesis]

Fiocco, Laura (2016) Silicate ceramics from preceramic polymers and fillers. [Ph.D. thesis]

Fontana, Christian (2018) Solid State Transformer. [Ph.D. thesis]

Fontana, Federico (2018) Progetto e analisi di pompe rotodinamiche multistadio dal design compatto. [Ph.D. thesis]

Fontanella, Chiara Giulia (2012) Biomechanical analysis of heel pad tissues. [Ph.D. thesis]

Forato, Mattia (2018) Dynamic Wireless Charging of Electric Vehicles. [Ph.D. thesis]

Francescon, Andrea (2016) Experimental investigation of flow boiling in silicon microchannel devices for electronics cooling. [Ph.D. thesis]

Franchin, Giorgia (2017) Additive Manufacturing of Ceramics. Printing Beyond the Binder. [Ph.D. thesis]

Frigo, Alessandro (2016) A procedure for the autonomic diagnosis of esophageal motor disorders from HRM data processing. [Ph.D. thesis]

Fuss Botti, Renata (2018) Development of Structured Porous Heterogeneous Catalyst for Biodiesel Production by Transesterification of Vegetable Oil. [Ph.D. thesis]

Gagliano, Onelia (2015) Development of a "lab on a chip" platform for studying the control of the circadian clock by metabolic cycles. [Ph.D. thesis]

Galvanin, Silvia (2018) Circadian Clock Study Through Frequency-Encoded Entrainment Stimulations. [Ph.D. thesis]

Gambato, Francesco (2015) Utilizzo di tecnologie avanzate per applicazioni di "high speed cooking". [Ph.D. thesis]

Gambetta, Giulio (2018) Development, Optimization and Testing of High Performance Cooling Systems for Fusion Devices. [Ph.D. thesis]

Garbo, Francesco (2019) Phytotreatment of contaminated wastewater with energy crops. [Ph.D. thesis]

Garbo, Francesco (2015) Sistemi di trasmissione ibridi per applicazioni off-highway: le macchine elettriche, la loro alimentazione e il loro controllo. Analisi dei vantaggi competitivi ottenibili attraverso schemi e soluzioni innovative. [Ph.D. thesis]

Gemo, Nicola (2013) Engineering the catalytic batchwise synthesis of H2O2 from its elements. [Ph.D. thesis]

Gennari, Claudio (2020) Enhancement of alloys formability by electroplastic effect. [Ph.D. thesis]

Giolo, Enrico (2015) Veicoli ricreativi progettati per l'utente quotidiano. [Ph.D. thesis]

Giordano, Gianmarco (2018) Electro-assisted deposition of sol-gel thin films: study of the process and its applications. [Ph.D. thesis]

Girotto, Francesca (2017) Food waste to bio-energy through anaerobic digestion under different management scenarios. [Ph.D. thesis]

Giubilato, Federico (2014) Development of integrated methods for the engineering characterization of bicycle components. [Ph.D. thesis]

Giulitti, Stefano (2014) High-throughput Human Cell Reprogramming through Substrate and Microfluidics Integration. [Ph.D. thesis]

Giusti, Ruggero (2017) Development of an Innovative Process Technology for the Manufacture of Structural Hybrid Components, Made by Forming and Overmolding of Thermoplastic Matrix Composites. [Ph.D. thesis]

Gobbin, Filippo (2019) Large Scale Additive Manufacturing of Inorganic Components. [Ph.D. thesis]

Graci, Samantha (2014) Innovative integrated solutions for the reduction of the energy demand and for the development of the renewable resources in residential buildings. [Ph.D. thesis]

Gredelj, Andrea (2019) Novel Experimental and Modelling Approaches for the Risk Assessment of Perfluoroalkyl Acids (PFAAs). [Ph.D. thesis]

Grespan, Eleonora (2015) Microstructured polymeric substrates applied to human stem cells studies. [Ph.D. thesis]

Hermanek, Petr (2017) Reference standards and methods for traceable X-ray computed tomography dimensional metrology. [Ph.D. thesis]

Jomaa, Tarek (2017) Implementation of Control and Acquisition System for a Tire Machine. [Ph.D. thesis]

Keshri, Ritesh Kumar (2014) Electric Vehicle Propulsion System. [Ph.D. thesis]

Khademzadeh, Saeed (2019) Assessment and Development of Laser-Based Additive Manufacturing Technologies For Metal Microfabrication. [Ph.D. thesis]

Lencina, Rodrigo (2014) Optimization of high carbon austenitic manganese steels for comminution processes. [Ph.D. thesis]

Loss, Andrea (2017) Development and testing of a new method to combine environmental management tools to improve life cycle management performance at industrial level. [Ph.D. thesis]

Maggiolo, Dario (2017) Numerical modeling and fluid-dynamic optimisation of fuel cells and flow batteries systems. [Ph.D. thesis]

Mahmoud, Hanafy (2017) Synchronous reluctance machines: eccentricity analysis and design criteria. [Ph.D. thesis]


Manzolini, Virginia (2019) Advanced algorithms for flux-weakening and sensorless control of interior PM and reluctance synchronous motor drives. [Ph.D. thesis]

Marangoni, Mauro (2016) Dense and porous glass and glass ceramics from natural and waste raw materials. [Ph.D. thesis]

Marco, Breda (2014) Phase stability in Duplex stainless steels. [Ph.D. thesis]

Masato, Davide (2018) Analysis of the tribological effects of mold surface properties on the micro injection molding process. [Ph.D. thesis]

Mazzali, Ugo (2014) Caratterizzazione di componenti speciali dell'involucro edilizio. [Ph.D. thesis]


Mazzi, Nicolò (2018) Optimal offering and operating strategies in electricity markets. [Ph.D. thesis]

Mazzucato, Federico (2017) Additive manufacturing through micro direct laser metal deposition technology: influence of the material and process parameters on the product quality. [Ph.D. thesis]

Medea, Francesco (2017) Tribological behaviour of high thermal conductivity tool steels for hot stamping. [Ph.D. thesis]

Medeossi, Fabrizio (2017) Enhancing optical measuring systems for manufacturing process control. [Ph.D. thesis]

Melazzi, Davide (2013) Development of Electromagnetic Codes to Analyze and Optimize Satellite Propulsion Systems and Communication Antennas. [Ph.D. thesis]

Melchiori, Tommaso (2014) Study of non catalytic gas-solid reactions: development of a single particle model. [Ph.D. thesis]

Mele, Adriano (2019) A flexible architecture for plasma magnetic control in tokamak reactors. [Ph.D. thesis]

Meneghetti, Natascia (2016) Implementing "Quality by Design" in the pharmaceutical industry: a data-driven approach. [Ph.D. thesis]

mezzarobba, mario (2013) Study of innovative electric machines for high efficiency vehicular traction applications. [Ph.D. thesis]

Michelon, Nicola (2015) Modelling and experimental investigation of microkinetic in heterogeneous catalysis: hydrogen combustion and production. [Ph.D. thesis]

Michieletto, Francesco (2016) Innovative forming processes of aluminium alloys sheets and tubes at elevated temperature. [Ph.D. thesis]


Mingardi, Damiano (2017) Analysis, design and test of high efficiency electrical machines with a rotor winding. [Ph.D. thesis]

Miranda Pérez, Argelia Fabiola (2013) Solid state phase transformations in Advanced Steels. [Ph.D. thesis]

Miste', Gianluigi (2015) Variable speed rotor helicopters: optimization of main rotor-turboshaft engine integration. [Ph.D. thesis]

Mocellin, Paolo (2017) CCS and EOR hazard analysis. Experimental investigation and modeling of multiphase CO2 pressurized releases. [Ph.D. thesis]

MOHAMED, MAHMOUD (2018) Model predictive control: an effective control approach for high performance induction machine drives. [Ph.D. thesis]

Monetti, Alberto (2017) Design and development of the target-ion source system for the SPES project. [Ph.D. thesis]

montecchi, tiziano (2013) Functional-based Approaches for Supporting Product Development. [Ph.D. thesis]

Morandin, Mattia (2013) Electric Drives with Permanent Magnet Synchronous Machines Connected to
Internal Combustion Engines.
[Ph.D. thesis]


Mude, Kishore Naik (2015) Wireless power transfer for electric vehicle. [Ph.D. thesis]

Musner, Tommaso (2013) Transport Processes and Optimization Strategies in Wetland Design. [Ph.D. thesis]

Niero, Monia (2013) Solutions to improve the reliability and applicability of life cycle assessment in industries. [Ph.D. thesis]

Novella, Michele Francesco (2015) Hot bulk damage modelling of precipitation hardened AA6082 aluminium alloy. [Ph.D. thesis]

Ortiz Gutiérrez, Ricardo Andrés (2015) Strategic analysis and optimization of bioethanol supply chains. [Ph.D. thesis]


Pachera, Matteo (2017) Numerical simulations of fires in road and rail tunnels with structural and fluid dynamic analysis. [Ph.D. thesis]

Pachera, Paola (2016) Integrated experimental and numerical approach to the biomechanics of surgical meshes evaluating interaction phenomena with regard to abdominal wall repair. [Ph.D. thesis]

Paduano, Andrea (2017) Development of innovative ceramic materials for electrocatalysis. [Ph.D. thesis]

Pagot, G (2018) Electrode and electrolyte materials for the development of high voltage lithium-ion batteries and secondary batteries based on alkali and alkaline-earth ions. [Ph.D. thesis]

Papale, Davide (2015) High performance waterjets: study of an innovative scoop inlet and development of a novel method to design ducted propellers. [Ph.D. thesis]

Parin, Riccardo (2019) Investigation of dropwise condensation on engineered surfaces. [Ph.D. thesis]

Pasqualetto, Michele (2013) Sistema di monitoraggio energetico di edifici. [Ph.D. thesis]

Pastore, Guido (2017) Tethers for Deorbit of Objects in High Eccentricity Orbits at the End-of-Life. [Ph.D. thesis]

Patricelli, Luca (2013) Innovative Solutions For The Thermal Control Of Aeronautic Vehicles. [Ph.D. thesis]


Peng, Wei (2019) Digestate application in landfill bioreactors: Nitrogen removal and digestate stabilization. [Ph.D. thesis]

Peretti, Clara (2013) Analisi della qualità degli ambienti interni. [Ph.D. thesis]

Petucco, Andrea (2017) Hardware in the loop, all-electronic wind turbine emulator for grid compliance testing. [Ph.D. thesis]


Piccolo, Damiano (2020) Epoxidation of vegetable oils by conventional and non-conventional methods. [Ph.D. thesis]

pogni, matteo (2017) Numerical study of bicycle racing wheels aerodynamic performances. [Ph.D. thesis]

Ponsot, Inès (2015) Glasses and Glass-Ceramic Components from Inorganic Waste and Novel Processing. [Ph.D. thesis]

Poskovic, Emir (2019) Innovative magnetic materials for the new applications in electrical machines. [Ph.D. thesis]

Pozza, Cristian (2014) Application of HPC in eddy current electromagnetic problem solution. [Ph.D. thesis]

Preindl, Matthias (2014) Novel Model Predictive Control of a PM Synchronous Motor Drive; Design of the Innovative Structure, Feasibility and Stability Analysis, Efficient Implementation, Experimental Validation. [Ph.D. thesis]

Prevedello, Lia (2016) Technologies to study the mechanosensitive response of cardiovascular cell cultures. [Ph.D. thesis]

Rabelo Monich, Patricia (2019) Waste-derived glass-ceramic products with novel functionalities. [Ph.D. thesis]

Rafieenia, Razieh (2019) Enhancement of hydrogen and methane production through anaerobic digestion using pre-treatments. [Ph.D. thesis]


Rathore, Jitendra Singh (2018) Computed tomography based quality optimization of micro injection molding. [Ph.D. thesis]

Rech, Sergio (2013) Analisi e ottimizzazione della configurazione di un macrosistema di conversione di energia. [Ph.D. thesis]

Ren, Jingzheng (2015) Sustainability-Oriented Decision Making Framework for Energy and Industrial Systems: Focusing on Hydrogen and Biofuels. [Ph.D. thesis]

Rigon, Daniele (2019) Development and assessment of energy methods for structural durability. [Ph.D. thesis]

Rincón, Acacio (2018) Development of low cost waste-derived sintered glass-ceramics for energy saving and recovery. [Ph.D. thesis]


Rossignoli, Massimo/M (2018) Study and design of ion beam production devices for the SPES project. [Ph.D. thesis]

Rota, Stefano (2013) Progettazione e realizzazione di un simulatore di guida motociclistico trasportabile. [Ph.D. thesis]


Sabokrouhiyeh, Nima (2018) Mass Transport Processes in vegetated wetlands-Optimal design of FWS wetlands. [Ph.D. thesis]

Saglia, Pietro (2018) New frontiers and environmental sustainability of refrigeration systems. [Ph.D. thesis]

SALINAS, ALDO (2018) Understanding the relationship between institutions and formal and informal entrepreneurial activity: The case of Latin American countries. [Ph.D. thesis]


Scanferla, Paolo (2020) Direct Ink Writing of Geopolymers. [Ph.D. thesis]

Scantamburlo, Francesco (2013) Design and analysis of a RFQ resonant cavity for the IFMIF project. [Ph.D. thesis]

Schmidt, Johanna (2018) Lithography-based additive manufacturing of ceramics from siloxane preceramic polymers. [Ph.D. thesis]

Schoech, Alexander (2016) Quality control of freeform parts at elevated temperature. [Ph.D. thesis]

Sgarabotto, Francesco (2014) Investigation of tribological properties of coated high strength steels in hot stamping. [Ph.D. thesis]

Sheriff, Michael (2015) Sustainable Entrepreneurial Economic Growth in Africa. [Ph.D. thesis]

Shojaei Barjoui, Arman (2018) On the coupling of peridynamics with the classical theory of continuum mechanics in a meshless framework. [Ph.D. thesis]

Simonetto, Enrico (2018) In-line control of tube bending processes by means of smart tools. [Ph.D. thesis]

Simonetto, Matteo (2018) Development and testing of a new life cycle assessment method for the monetary evaluation of water scarcity impacts. [Ph.D. thesis]

Solana Ciprés, Miriam (2016) Supercritical CO2 technologies for the production of bioactive compounds from natural sources. [Ph.D. thesis]

Somia', Tatiana (2019) Operations manager's individual competencies for mass customization. [Ph.D. thesis]

Sorgato, Marco (2016) Characterization of the micro injection molding of micro- and nano- structured polymer surfaces. [Ph.D. thesis]

Spezzapria, Mattia (2016) Multiphysyical Finite Element Simulation of Contour Induction Hardening of Gears. [Ph.D. thesis]

Spreafico, Christian (2017) A new set of guidelines for inventive problem solving. [Ph.D. thesis]

Strozi Cilla, Marcelo (2015) Highly porous geopolymers: effect of the processing route on the reached properties. [Ph.D. thesis]

SUN, C (2018) Electrical energy storage by electrochemical vanadium redox flow battery methods. [Ph.D. thesis]

Szathvary, Isacco (2015) Soft and hard tissues in esthetic implant dentistry: a novel 3D computer-aided approach to dimensional changes evaluation in immediate vs delayed implantation treatment. [Ph.D. thesis]

Tambani, Chiara (2013) Impianti innovativi per la riqualificazione di edifici storici. [Ph.D. thesis]

Taraborrelli, Luca (2016) Identification and improvement of the dynamic properties of the components of two-wheeled vehicles. [Ph.D. thesis]

Tavernini, Davide (2014) Sport vehicles and virtual riders modeling. [Ph.D. thesis]

Terrin, Andrea (2017) Analysis and design against pitting of gears in power transmissions for off-highway vehicles. [Ph.D. thesis]

Testa, Samuele (2013) Airflow fields analysis in bounded domains with CFD methods. [Ph.D. thesis]

Tognazzo, Mauro (2013) Modelli per la simulazione del sistema motociclo-uomo e identificazione delle proprietà biomeccaniche del pilota. [Ph.D. thesis]

Tolomio, Alessandro (2016) Simulazioni numeriche per lo sviluppo di tecniche innovative di casting per la produzione di SoGSi nel sistema iDSS. [Ph.D. thesis]

Tomba, Emanuele (2013) Latent variable modeling approaches to assist the implementation of quality-by-design paradigms in pharmaceutical development and manufacturing. [Ph.D. thesis]

Toninelli, Paolo (2017) Two-phase heat transfer in minichannels: modeling and heat pump applications. [Ph.D. thesis]

Toniolo , Sara (2015) Accuracy of the results in Life Cycle Assessment in case of recycling. [Ph.D. thesis]

Torchio, Riccardo (2019) Extending the Unstructured PEEC Method to Magnetic, Transient, and Stochastic Electromagnetic Problems. [Ph.D. thesis]

Torzo, Davide (2013) Tool di design acustico preliminare per turbine aeronautiche. [Ph.D. thesis]

Tristo, Gianluca (2014) Tool wear compensation and energy efficiency in micro milling Electrical-Discharge Machining. [Ph.D. thesis]

Tronco, Sergio (2017) Development and Testing of Hardware Simulator for Satellite Proximity Maneuvers and Formation Flying. [Ph.D. thesis]

Trovò, Andrea (2019) Industrializing Vanadium Redox Flow Battery. [Ph.D. thesis]

Usman, Muhammad (2019) Novel Methodologies for the Analysis and Management of Low Voltage Active Distribution Networks. [Ph.D. thesis]

Valoppi, Beatrice (2017) Feasibility of producing Ti6Al4V biomedical parts through sheet forming processes at elevated temperature. [Ph.D. thesis]

Veneri, Matteo (2019) Minimum-lap-time of race vehicles. [Ph.D. thesis]

Venturato, Giulia (2019) Modelling the Influence of Phase Transformation Kinetics in 22MnB5 Hot Stamping. [Ph.D. thesis]

Venturelli, Giovanni (2015) Development of numerical procedures for turbomachinery optimizaion. [Ph.D. thesis]

Vialetto, Giulio (2019) Energy efficiency in industrial facilities - Improvements on energy transformation and data analysis. [Ph.D. thesis]

Vicenzutti, Andrea (2016) Innovative Integrated Power Systems for All Electric Ships. [Ph.D. thesis]

Visentin, Francesca (2019) A two-step approach to surface functionalize Ti dental implants. [Ph.D. thesis]

Vitali, Andrea (2016) Augmented interaction for custom-fit products by means of interaction devices at low costs. [Ph.D. thesis]

Vivian, Jacopo (2018) Direct Use of Low Temperature Heat in District Heating Networks with Booster Heat Pumps. [Ph.D. thesis]

Volpato, S. (2017) Modeling of segregation in dense granular flows. [Ph.D. thesis]

WANG, QIAOLING (2019) Modelling plastic behaviour and fracture occurrence in HCP metal sheets deformed in a wide range of temperatures and stress states. [Ph.D. thesis]

WANG, YAWEI (2018) High Performance Synchronous Reluctance Machines: Design and Applications. [Ph.D. thesis]

Yang, Jun (2015) Flow Patterns Causing Saddle Instability in the Performance Curve of a Centrifugal Pump with Vaned Diffuser. [Ph.D. thesis]

Yang, Yang (2019) Micropattern technology applied to the in vitro study of the early embryonic development. [Ph.D. thesis]

Zabihi Sheikhrajeh, Nima (2013) Vehicle-to-grid (V2G) and grid conditioning systems. [Ph.D. thesis]

Zamberlan, Daniel (2015) Roadmapping for Corporate Strategy: Action Research in Convergence of Technologies. [Ph.D. thesis]

Zambon, Alessandro (2013) Development of microfluidic cell culture technology for the study of type 2 diabetes. [Ph.D. thesis]

Zamuner, Annj (2018) Functionalized polymer-derived bioceramics for bone tissue engineering. [Ph.D. thesis]

Zanatta, Michele (2017) Design and development of a SICM/EC device for H2/O2 detection in photoelectrocatalytic water splitting process. [Ph.D. thesis]

Zanchetta, Erika (2014) Innovative patternable materials for micro- and nano- fabrication. [Ph.D. thesis]

Zanini, Filippo (2017) X-ray computed tomography for coordinate metrology and industrial applications. [Ph.D. thesis]

Zuliani, Filippo (2018) Nitrogen footprint: development and testing of new methodologies for the assessment of environmental impact related to the nitrogen cycle. [Ph.D. thesis]

This list was generated on Sat Apr 17 09:52:55 2021 CEST.